Disposable vapes have become the go-to choice for many vapers—they’re affordable, convenient, and ready to use right out of the box. But nothing’s more frustrating than pulling out your vape and finding it won’t hit. Don’t worry—you’re not alone, and in many cases, the fix is simple. Here’s a detailed guide on how to fix a disposable vape that won’t hit.
1. Check the Basics: Is the Vape Empty?
Before trying any fixes, start with the obvious. Is there any e-liquid left? Is the battery still working?
-
E-liquid Level: Many disposables have a clear window—if it’s dry, your vape is done. Time for a new one.
-
Battery Check: Some vapes flash an LED when the battery dies. If yours doesn’t light up or respond at all, it might be drained or faulty.
If your vape still has juice and seems powered, move on to troubleshooting.
2. Inspect the Airflow
Most disposable vapes are activated by airflow. If airflow is blocked, your vape won’t fire.
-
Clean the Airholes: Locate the small air intake holes (usually near the bottom or sides). Use a toothpick or a small pin to gently clean them out.
-
Blow Through the Mouthpiece: Hold the vape upside down and softly blow through the mouthpiece. This may clear out trapped e-liquid or debris.
3. Tap or Gently Shake the Device
Sometimes the e-liquid isn’t evenly distributed or a small blockage disrupts the hit.
-
Tap the device gently against your palm.
-
Hold it upright and give it a light shake to help move the liquid back to the coil.
4. Check the Battery-to-Coil Connection
If the battery isn’t connecting properly to the coil, the vape won’t work.
-
If the device can be opened safely, check inside for dust or residue.
-
Use a cotton swab and a little rubbing alcohol to gently clean the connections. Let it dry fully before trying again.
5. Prime the Coil
Sometimes, a new vape won’t hit because the coil hasn’t been saturated properly.
-
Take small, quick puffs without inhaling deeply.
-
Let the vape sit upright for a few minutes to allow the e-liquid to soak into the coil.
6. Warm It Up
Cold weather can affect vape performance. E-liquid thickens, and the battery might not deliver enough power.
-
Hold the vape in your hands or keep it in your pocket for a few minutes.
-
Never use a lighter, microwave, or external heat source—it can damage the vape or cause it to explode.
7. Puff Gently and Differently
Disposable vapes are draw-activated. If you pull too hard or too soft, it might not respond.
-
Try a slow, steady inhale instead of a strong pull.
-
Rotate the device slightly or adjust how you inhale to reset airflow sensors.
8. Open and Adjust (Advanced Option)
If you’re confident and the device allows it, you can try opening it up.
-
Carefully remove the mouthpiece or base using a small tool.
-
Inspect the coil and wick. If they’re dry, add 1–2 drops of e-liquid directly on the wick.
-
Reassemble and test.
Note: Opening the vape may void any return or warranty and can be unsafe if done incorrectly.
9. Replace If Needed
If nothing works, your vape may be defective or simply used up. Disposable vapes are not built to last forever.
-
Contact the Retailer: Many shops offer replacements or refunds for faulty products.
-
Try a Trusted Brand: If you’ve had repeated problems with one brand, switch to a more reliable one like Ace Ultra Premium.
10. Tips to Prevent Future Issues
-
Store properly: Keep your vape in a dry, room-temperature place.
-
Avoid long draws: Overdrawing can burn out the coil quickly.
-
Handle with care: Don’t drop or shake your vape excessively.
-
Recycle when done: Help reduce waste by properly disposing of your vape if possible.
Final Thoughts
A disposable vape that won’t hit can be annoying, but many issues have simple fixes. By checking the battery, airflow, and coil—and knowing when to call it quits—you can get back to vaping in no time. And remember, with high-quality brands like Ace Ultra Premium, you’re less likely to run into these issues in the first place.
